Orkot Marine bearings design and manufacture Stern
tube bearings for commercial and naval vessels. Orkot Marine
stern shaft / propeller shaft bearings can be used as a conventional
water lubricated stern shaft / propeller shaft bearing or as
an A bracket bearing for naval ships.
Orkot marine bearings for stern shafts / propeller shaft bearings
can be assembled by press fitting, chocking, or using a mechanical
fixing such as taper locking keys.
Orkot Marine bearings can be manufactured in two grades of
material, Orkot TLMM for conventional vessels and Orkot Marine
TXMM for naval and special vessels.
Orkot Marine Stern tube / propeller shaft / propeller shaft bearings
in TLMM and TXMM have been tested on Naval test rigs and show
that Orkot Marine TXMM and TLMM Stern tube / propeller shaft
bearings have low wear rates and low friction.
Orkot Marine Bearings tests all TXMM and TLMM material in a continual
basis to ensure consistent quality to ensure that our stern tube/
propeller shaft bearings meet the required standard.
Orkot Marine A Bracket Bearings are specified on the new Royal
Navy Type 45 Destroyer and Orkot Marine bearings are used on
the Triton test vessel for Stern Tube bearings.
Orkot TLMM and TXMM stern tube / propeller shaft bearings exhibit
low noise and vibration characteristics for use on naval vessels.
Orkot Marine Bearings Stern tube / propeller shaft bearings are
recommended to be fitted with Liquid Nitrogen and in some cases
using Dry Ice or can be resin chocked.
Orkot Marine Bearings can manufacture Stern shaft bearings
up to one metre diameter and Orkot Marine bearings can deliver
semi finished tubes for stern tube bearings/propeller shaft bearings.
Orkot Marine Bearings have all major classification society
approvals at 2/1 length to diameter ratio for stern tube bearings.
Orkot Marine Bearings can deliver Semi finished tube for stern
tube bearings in 2/3 days to customer requirement.
Click here to go
to our home page